|
Six Ways That AMSOIL Can Save Gas
Are today's gas prices draining your bank account?
AMSOIL lubricants reduce friction in your engine, your transmission, and your gear boxes. When friction is reduced it takes less energy to turn the wheels of your vehicle, thus increased efficiency and increased fuel economy. Many customers report having to set down t heir idle on the fuel system because it was too high after switching to AMSOIL. Engines run higher RPM on the same fuel, reduced friction means better gas economy and better protection for your engine.
AMSOIL should save you enough per year in fuel savings to pay for all your vehicles lubrication needs.- If you get an average of 20 miles per gallon and travel 15,000 miles per year you use 750 gallons of gas per year. At the present cost of unleaded gas ($3.00) in my area, you'll spend $2250.00 per year on fuel. If you can get a 2 mile per gallon increase (10%), your gas usage will decrease to 682 gallons or $2046.00 per year. That's a savings of $204.00 per year! You can get your engine and transmission protected with AMSOIL for a lot less. Even just a one mile per gallon increase would save $97.00 per year, which is enough to switch over your engine to AMSOIL for the year plus you'll have $51 left over!
So you see, just the fuel savings vs. regular oil will pay for your AMSOIL. The benefits you will see from AMSOIL will be longer engine life, better performance, less repairs, less downtime, less wear on the engine, your vehicle will stay newer for longer. You also save money in reduced oil changes. See how.
With the use of all of these seven products below you can expect to get the best possible fuel economy. The more of the seven you use, the better the mileage you can acheive. Use any AMSOIL synthetic oil, they are all very fuel efficient, but the 0W-30 is the most fuel efficient.
Ron Toomes, Missoula, Montana "These are some fantastic automotive products! I have been using AMSOIL for over 11 years and I have not had any internal engine problems on any of the vehicles or equipment I've used it in, and I've put over 200,000 miles on a couple. I have always gotten TOP DOLLAR for my vehicles when I sell them because they are excellent running used cars. People know as soon as they test drive them that they were well maintained!
My latest truck is a 1994 4x4 Ex.Cab Ranger Truck with the 4.0 liter V-6 and manual transmission. It had Quaker State 10W-30 in it when I bought it with 67,000 miles on it. The guy had just changed the oil and I wanted to check the mileage with petroleum oil so I ran the truck 1000 miles before switching over to AMSOIL. It was getting 19 mpg hwy mileage.
I put AMSOIL Series 2000 0W-30 Synthetic Oil in the engine, Series 2000 75W-90 Gear Lube in the Transfer Case and Gear Boxes, and AMSOIL ATF in the Transmission. I put the 2-Stage AMSOIL Air Filter on it and I installed the Bosch +4 spark plugs in. I now get 23 mpg hwy!!! That's over 20% increase in gas economy. AMSOIL saved me $216.00 my first year in gas purchases. These products PAY FOR THEMSELVES."
Bobby Grove, of Prince George, VA, purchased a used 1985 34' Pace Arrow motor home from a friend of his. This vehicle had 45,000 miles and had been given reasonable care. The engine was a Chevy 454 V-8 with a generator and two roof top AC units. His friend explained to Bobby that the mileage was not the best and he consistently got about 5 mpg regardless of driving conditions.
The first thing Bobby did was tune it up and in the process found a broken plug wire. He then took a 150 mile trip and got 6.1 mpg. The RV was then converted over to AMSOIL completely. He put Series 2000 0W-30 synthetic motor oil in the engine, 75W-90 synthetic gear lube in the differential, repacked the wheel bearings, changed the fluid in his automatic transmission to AMSOIL ATF and added PI Performance Improver to his gas tank. Bobby then made the same 150 mile trip and calculated his mileage and to his delight he got 7.9 mpg. A few weeks later he took a trip up to a campground in western VA, and this involved going over the Blue Ridge Mountains. When he got to the campground he filled up and calculated his mileage and to his amazement got 9.9 mpg. His next trip was to Virginia Beach, VA, a 200 mile round trip on level terrain, running both AC's the whole time. He then filled the tank and came up with mileage of 10.2 mpg. Bobby is a long time user of AMSOIL and knew the RV would do a lot better but never anticipated these kind of results.
Six AMSOIL Products to Save You Gas!
1. AMSOIL Engine Flush
Click here to view pricing and to order
Engine Flush (AEF)
AMSOIL Quick Acting Engine Flush is crafted from a carefully selected blend of special cleaning agents and solvents that disperse and dissolve harmful engine deposits formed in the cylinder walls, rings, crankcase, and pistons of your vehicle's engine. When used as directed, it restores and cleans operating efficiency to rocker arms, valves, pistons, and valve lifters for improved fuel economy, horsepower and performance. Use before changing oil.
To quickly clean residual sludge and engine deposits, AMSOIL Engine Flush is recommended: Change the oil filter and add the flush (about 10% of the oil capacity). Do not overfill the crankcase. Idle the engine 15 to 20 minutes, then immediately drain the old oil and flush.
*Note: Engine Flush is not recommended for use in transmissions, differentials, air-cooled engines, engines that share a common oil sump with the transmission (motorcycles & ATV's) or engine not equipped with an oil filter.
2. AMSOIL Signature Series Synthetic 0W-30
Buy Signature Series 0W-30 Now
Synthetic 0W-30 Motor Oil (SSO)
Modern passenger car and light truck engines are built for fuel effi ciency and power. AMSOIL Synthetic 0W-30 Motor Oil optimizes efficiency and power without the sacrifice in wear protection that comes with many fuel-efficient, low-viscosity oils.
Testing shows AMSOIL Synthetic 0W-30 Motor Oil dramatically outperforms popular conventional and synthetic motor oils of typical viscosities in wear protection
Ultimate Fuel Efficient Formula
AMSOIL Synthetic 0W-30 Motor Oil effectively transfers energy from your vehicle's engine to the it's drivetrain. Low friction inhibits the energy loss to "drag" found in high viscosity oils.
Motorists looking for the best fuel efficiency should use AMSOIL Synthetic 0W-30 Oil in place of other 5W-30 or 10W-30 oils.
3. Long Life Synthetic Gear Lube SAE 75W-90 (FGR)
Order Long Life Synthetic Gear Lube SAE 75W-90
Formulated for the severe operating conditions of today's car's, pic kups, and SUVs..
Friction Reduction and Fuel Economy
AMSOIL Long Life Synthetic Gear Lubes are extended drain gear lubes engineered specifically to last several times longer and protect gears better than all conventional gear oils. These exclusive AMSOIL formulations of premium synthetic base oils and high performance additives resist acid, carbon and varnish formation from oxidative breakdown. Components run cleaner and last longer. AMSOIL Long Life Synthetic Gear Lubes are shear stable and friction reducing. They maintain their viscosity during extended service for maximum wear control and they are fuel-efficient. The superior cold temperature fluidity and high temperature stability properties of AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment lasts longer and maintenance costs are reduced with AMSOIL Long Life Synthetic Gear Lubes.
4. AMSOIL Synthetic Automatic Transmission Fluid
Click here to view pricing and to order
Synthetic Universal Automatic Transmission Fluid (ATF)
Recommended for most automatic transmissions. Eliminates confusion, mis-applications and lowers inventory requirements. Delivers maximum protection and is excellent in demanding environments such as towing, hauling or commercial use. Lasts longer than conventional oil for extended drain intervals. Saves time and costly maintenance expenses. Superior hot and cold weather performance. Improves efficiency and typically reduces operating temperatures by as much as 50°F.
Antiwear Protection and Fuel Efficiency
AMSOIL ATF provides smooth shifting and long, trouble-free transmission life. In addition, the
antiwear additive package makes AMSOIL ATF an excellent lubricant in other hydraulic systems. In tests designed to measure wear characteristics under severe service and high pressure operating conditions, AMSOIL ATF far exceeds the requirements of hydraulic equipment manufacturers.
5. AMSOIL Ea Air Filters (EaA)
AMSOIL Ea Air Filters (EaA)
The Absolute Best Air Filtration Available for Cars and Light Trucks. Improves air flow and fuel economy.
Click here to view pricing and order.
AMSOIL Ea Air Filters represent a major breakthrough in filtration technology. The revolutionary nanofiber technology used in AMSOIL Ea Filters captures more dirt, holds more dirt and allows better air flow than conventional air filters. AMSOIL Ea Filters improve engine performance and help engines last longer.
AMSOIL Ea Air Filters are guaranteed for four years or 100,000 miles, whichever comes first. The guarantee applies only if the filter has been serviced according to AMSOIL recommendations. In off-road, frequently dusty or other severe duty applications, clean and change more often as determined by operating conditions or as indicated by restriction gauge.
6) P.I. Performance Improver Gasoline Additive
Powerpoint Presentation
Restores fuel injectors and intake valves to new car efficiency!
Untreated Fuel Leads to Poor Engine Performance
A vehicle demonstrates its best efficiency and engine performance when it is new. As the engine ages, its performance suffers from gasoline fuel-generated deposits that form on the fuel injectors, intake valves and combustion chamber. Additives are required to control deposit formation.
Click here to view pricing and to order
Today's fuels, however, lack sufficient treatments of either enough additives or high quality additives. Fuel system deposits result in the following:
• Lost fuel economy
• Lost power and poor throttle response
• Failed emission tests
• Poor drivability - surging, hesitation, stalling, rough idle
• Engine knocking (pinging) and rap
• Difficult starts
Treated Fuel Delivers Maximum Performance
AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed AMSOIL P.i. provided the following clean-up benefits after only one tank of gasoline:
• Improves fuel mileage an average of 2.3% and up to 5.7%
• Reduced emissions
• hydrocarbons (HC) up to 15%
• carbon monoxide (CO) up to 26%
• nitrous oxides (NOx) up to 17%
• Restored power and performance
• Reduced need for costly higher octane fuel
• Reduced noise from carbon rap and pre-ignition
• Better drivability
• Smoother operation
AMSOIL P.i. works as an "emissions passer." It is ideal for use prior to emissions inspections.
Unsurpassed Deposit Clean-up
Port Fuel Injector Deposits form after the engine has been shut down and there is no gasoline flowing through the injectors. During this "hot soak" period the injectors heat up and the gasoline remaining in the injectors degrades and forms deposits. This can happen very quickly with the use of poor quality gasoline and short trip driving. Because the clearances within the injectors are extremely tight and injectors must deliver precise amounts of "atomized" fuel, even small amounts of deposits can cause injectors to malfunction. Fuel flow is reduced and spray patterns are disrupted, decreasing engine efficiency, power and fuel economy, while increasing exhaust emissions.
|
