The Official Two-Cycle Oil of the WSA Snocross World Wide Championships
Snowmobile Lubrication and Care For Racing and Recreation
Using Amsoil synthetics, you will gain:
- Horsepower
- Reduce friction
- Superior lubrication
- Cooler operating temps
- Keep your spark plugs cleaner
- Eliminate carbon deposits
- And extend the life of your engine
The Snowmobile market in the U.S. has been expanding rapidly in the 21st century. As the popularity of Snowmobiles has increased, so have many forms of Snowmobile racing.
Manufacturers have responded to the market by developing many new race models. The Snowmobile aftermarket has also expanded with hundreds of new products to increase performance and horsepower. Many of these were developed for racing and off road competition.
In the sport of Snowmobile racing, riders are always searching for an advantage over their competition. Many spend thousands of dollars to increase performance at the expense of reliability.
Now there is a way to gain horsepower, and add reliability to your Snowmobile and in most cases, spend less money then you are spending now.
If you are racing a lightning quick two-stroke Snowmobile or a high torque four stroke Snowmobile, we carry a complete line of Amsoil synthetic oils to help you gain the advantage you are searching for. Using Amsoil synthetic oils you will:
- Reduce friction and wear, extending engine life
- Achieve superior lubrication and cooler operating temps
- Create more horsepower and throttle response
- Eliminate carbon deposits and keep sparkplugs clean
TWO-CYCLE OIL RECOMMENDATION
|
AMSOIL Product
|
Outboard *
|
Snowmobile Motorcycle* & ATV*
|
Personal Watercraft* & Jet Boat*
|
Chainsaw, Chop Saw & Pump
|
Weed Eater, Blower & Lawn Mower
|
Moped, Scooter & Go-Cart
|
HP Injector (HPI) TC-W3, API TC (Injection or 50:1 Pre-Mix)
|
Excellent
|
Very Good
|
Very Good
|
Not recomm.
|
Not recomm.
|
Not recomm.
|
INTERCEPTOR (AIT) API TC, JASO FC
|
Not recomm.
|
Excellent
|
Excellent
|
Good
|
Good
|
Good
|
DOMINATOR (TDR) API TC, JASO FC
|
Racing (1)
|
Racing (2)
|
Racing (2)
|
Very Good
|
Very Good
|
Very Good
|
Saber Professional 100:1 (ATP) Pre-Mix ISO-L-EGD JASO FC, API TC
|
Not recomm.
|
Very Good Pre-Mix Only
|
Very Good Pre-Mix Only
|
Excellent
|
Excellent
|
Excellent
|
Saber Outboard 100:1 (ATO) Pre-Mix, TC-W3, API TC
|
Excellent Pre-Mix Only
|
Very Good Pre-Mix Only
|
Very Good Pre-Mix Only
|
Not recomm.
|
Not recomm.
|
Not recomm.
|
|
|
Excellent: "The" primary recommendation for the oil. This is the best possible choice for the application. The oil is specifically designed for the operating conditions of the motors in these markets. There is only one "Excellent" recommendation per category.
Very Good: A main recommendation for the oil. Identifies an oil that is very good for the operating conditions of these motors.
Good: A secondary recommendation for an oil. The oil was not specifically designed for these applications, however, the chemistry in the oil is suited to the operating conditions of these motors.
Not Recommended: Identifies applications where the product was not intended for use. "Excellent" rated products offer superior performance.
Racing:
- (1) Not recommended for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short term use where motors are periodically inspected.
- (2) Excellent for racing or modified motors. Very good for recreational use.
- *Recommended for all (OFI) direct fuel injected, (EFI) electronic fuel injected, and carbureted motors. Outboard motors include Mercury®, Optimax®, Johnson® & Evinrude® FICHT® & E-TEC®, Yamaha® HPDI, Nissan® & Tohatsu® TLDI®
See our 2 Cycle Oils page for more information
Other Fine AMSOIL Products for Your Snowmobile
AMSOIL Formula 4-Stroke 0W-40
Specially formulated to lubricate and protect 4-stroke recreational motors.Product Code: AFF
AMSOIL Formula 4-Stroke Synthetic Motor Oil is specially formulated for four-stroke recreational motors, including ATVs, Outboard Motors, Snowmobiles, and Motorcycles. It may also be used in cars and trucks. Its broad viscosity range makes it excellent for use in both hot and cold temperature extremes.
MPHD Heavy Duty Metal Protector
A heavy duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long lasting protective coating. Apply MPHD to any metal surface that requires a heavy duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle chains. Won't "sling" off. Dry to the touch. Doesn't attract dust. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating car doors, wheel wells, rocker panels, seams and other metal surfaces exposed to water, dirt or road salt. Product Code: AMH
Prevents rust & corrosion, even in salt water Displaces water Stops squeaks Lubricates metal surfaces Leaves a dry, long-lasting, wax-like film Sprays into hard-to-reach places Lubricant does not attract dust Does not sling off Ideal for chains & other heavy-use items
Series 2000 Synthetic Gear Lube
AMSOIL Series 2000 Synthetic 75W-90 Gear Lube delivers unbeatable protection and fuel economy. It has the film strength required to deliver all the protection heavy-duty and high-stress applications need in a fuel-saving viscosity grade. Recommended for use in all passenger vehicles, commercial trucks and race vehicles. Product Code: TGR
Provides superior lubrication, protection, and fuel economy in racing and commercial applications
Series 2000 Synthetic Racing Grease
"Unbeatable high-speed/high temperature performance"
Ultimate protection for hard-driven, high-performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high and low temperature performance. Outperforms other conventional and synthetic greases.
Product Code: GRG
Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.
Shock Therapy Suspension Fluid
AMSOIL Shock Therapy Suspension Fluids are formulated for maximum stability and high performance. High quality synthetic basestocks and high viscosity indices provide unparalleled shear stability. AMSOIL Shock Therapy Suspension Fluid controls friction and heat, reduces wear and scuffing and prevents fade more effective than conventional fluids can. AMSOIL Shock Therapy Suspension Fluid has been tested in the lab and against the competition and proven to be of the highest quality at a wide range of temperatures and applications.
Controls Dampening and Rebound
With AMSOIL Shock Therapy Suspension Fluid, viscosity remains constant and aeration and foam are greatly reduced, significantly limiting shock fade and inconsistent dampening. AMSOIL Shock Therapy Suspension Fluid (STL & STM) is formulated for fade-free dampening and smooth rebounds in many racing and recreational applications, reducing rider fatigue and enabling the driver to ride longer and harder while keeping focused on the terrain ahead.
|